|
|
Post by aurora2001tan on Jan 20, 2007 14:28:29 GMT -6
|
|
|
|
Post by fjs442 on Feb 5, 2007 12:26:24 GMT -6
I have the same problem with mine. I ordered and have the parts but have not gotten around to fixing it yet. I ordered the exhaust manifold gasket too. Did you replace yours? Sucks that Fel-Pro does not make/sell gaskets for the 3.5 Mine started leaking around 75k. It leaked on and off but never to the point where I was adding a lot of coolant. I put another 10k on it before parking it until I do the shift solenoids in the trans. The trans was really acting up and did not want to drive it anymore.
|
|
|
|
Post by aurora2001tan on Feb 5, 2007 20:03:58 GMT -6
new exh manifold gasket is a must. you wana good seal, if it leaks it can burn and warp the head. You will also want someone to help hold the exh. when you remove and install the crossover pipe. mine never leaked a whole lot to be adding either but i didnt like the puddles on the floor either. gl with those
|
|
|
|
Post by irocjohnny on Feb 10, 2007 17:48:20 GMT -6
Don't forget to put a little sealer on the threads of the bolts, or you may have a leak later.
|
|
