|
Post by ajxtcman on Nov 28, 2007 17:20:06 GMT -6
;D I can fix you no Throttle response ;D Wait I can fix most any part of the Program Yeah I know what I am doing. I was invited over here. Hey all you Aurora guy's that have contacted me before. I am about ready to launch some tunes for you guy's www.google.com/webhp?hl=enjust type in AJxtcman
|
|
|
Post by austinator on Nov 28, 2007 17:44:02 GMT -6
You are going to do 95's as well? You do know that the '95 pcm is obd1.5(obdi computer with obdii interface) and has a removable PROM chip, correct? 96+ are all obdii
|
|
|
Post by ajxtcman on Nov 28, 2007 17:52:38 GMT -6
|
|
|
Post by ajxtcman on Nov 28, 2007 18:02:50 GMT -6
You are going to do 95's as well? You do know that the '95 pcm is obd1.5(obdi computer with obdii interface) and has a removable PROM chip, correct? 96+ are all obdii I finnally got that picture the way I wanted it. As you can see I am doing that group also
|
|
|
Post by austinator on Nov 28, 2007 18:04:04 GMT -6
Great! I just wanted to make sure that you knew they were different since you had them grouped together. Mind saying where you're located?
|
|
|
Post by ajxtcman on Nov 28, 2007 18:17:25 GMT -6
Great! I just wanted to make sure that you knew they were different since you had them grouped together. Mind saying where you're located? It would be hard to let the 95 stand alone. The 00+ has a different crank, so it won't interchange
|
|
|
Post by aurorabrain on Nov 28, 2007 18:32:29 GMT -6
Do you have any current projects in the works so that we can see some real results?
|
|
|
Post by ajxtcman on Nov 28, 2007 19:05:55 GMT -6
Do you have any current projects in the works so that we can see some real results? This was in the dark, so you can't see too much, but it sound great! www.youtube.com/watch?v=VXTMhojkmhE
|
|
|
Post by JimW on Nov 28, 2007 19:25:37 GMT -6
I'm cautiously optimistic about this!
I'll have to do some reading up about it, but it seems promising.
Thanks for signing up here with us.
|
|
|
Post by algonquin on Nov 28, 2007 21:57:31 GMT -6
How much ?
|
|
phydeaux
Aurora Passenger
I keep extra bearings handy in case I can't fix it with a hammer
|
Post by phydeaux on Nov 29, 2007 7:03:18 GMT -6
Do you have any current projects in the works so that we can see some real results? AJ and I are working together on the Shelby Aurora project and should see some results sometime next week Jason.
|
|
|
Post by ajxtcman on Nov 29, 2007 7:40:16 GMT -6
I loaded one up for you last night
|
|
phydeaux
Aurora Passenger
I keep extra bearings handy in case I can't fix it with a hammer
|
Post by phydeaux on Nov 29, 2007 9:43:50 GMT -6
Sweetness, I'll have one in the mail to you tomorrow.
|
|
|
Post by majoraurora on Nov 29, 2007 18:10:16 GMT -6
What website is this?
|
|
|
Post by ajxtcman on Nov 29, 2007 20:30:36 GMT -6
|
|
|
Post by alecbeaton on Nov 29, 2007 22:11:19 GMT -6
ajxtcman: Will there be a way for you to just CHANGE parameters in the stock PCM, basically removing the top speed and torque management. I'm not as worried about the TM, but the non-autobahn equipped cars could be just as fun with no speed limiter. Can you do just those?
|
|
|
Post by ajxtcman on Nov 30, 2007 6:44:18 GMT -6
ajxtcman: Will there be a way for you to just CHANGE parameters in the stock PCM, basically removing the top speed and torque management. I'm not as worried about the TM, but the non-autobahn equipped cars could be just as fun with no speed limiter. Can you do just those? We will see. I have done it in the same type of program on the Caddy's
|
|
|
Post by alecbeaton on Nov 30, 2007 13:30:21 GMT -6
Great! Keep me posted.
|
|
|
Post by ajxtcman on Jan 1, 2008 14:06:46 GMT -6
I need a 97 Aurora with Autobahn to run a test program on. IN MILWAUKEE area
This will not hurt your car I will guaranty it 100% with $$$
I just need to Datalog 4 programs. it will take about 2 hours of time max. Each program will be in for 15 minutes or so. You can keep the one you want. I will have PCM's to swap in and out.
This is safe
It must be a 3.71 geared car. I would like a 1997 and a 1996.
|
|
|
Post by KliffsAurora on Jan 1, 2008 15:42:13 GMT -6
To bad you can't use a 95'
|
|
|
Post by lynzoid on Jan 2, 2008 7:17:42 GMT -6
hello AJ, happy new year and thanx for visiting our board !! i am also looking forward for 95' eeprom mods - no limiter, changed fan logic etc keep us posted ! thanx
|
|
motbooz
Aurora Groupie
Your third party candidate
|
Post by motbooz on Jan 2, 2008 9:01:09 GMT -6
You're welcome to come to sunny Atlanta for your test (can't quite get to Milwaukee).
1996 Autobahn here.
|
|
|
Post by crashmedic on Jan 4, 2008 15:25:58 GMT -6
I'd offer my 97 up but as u already know it is not an autobahn. If you need a non-autobahn let me know.
|
|
|
Post by ajxtcman on Jan 4, 2008 20:00:33 GMT -6
I just spent a long time on the phone with Westers. New software will be coming soon
|
|
looselimb
Aurora Watcher
The pursuit of happiness is won in the drivers seat
|
Post by looselimb on Jan 8, 2008 16:47:53 GMT -6
are those crys. rims major
|
|
looselimb
Aurora Watcher
The pursuit of happiness is won in the drivers seat
|
Post by looselimb on Jan 8, 2008 16:49:51 GMT -6
how about a 97 autobahn in south dakota for those tests,aj
|
|
|
Post by ajxtcman on Jan 10, 2008 6:26:31 GMT -6
I am waiting on some new software that will change the way I work in the PCM. This is very cool. I will keep you all posted.
|
|
|
Post by lynzoid on Jan 11, 2008 9:48:33 GMT -6
mate, do you have 95's EEPROM electrical diagram ? i do have flash/eeprom programmer over here, so i may need only hex files for prom and memcal.
|
|
|
Post by majoraurora on Jan 30, 2008 9:20:25 GMT -6
are those crys. rims major Yes, they are 18" Clads from a 300C. They have 235/50-18 BFG KDWS tires. I had a slight rub in the rear end (since the offset puts the tires right to the edge, see my MFA post) but put those little spring boosters in and it took care of it.
I also need a prom for my 95, no limiter, fan logic etc...
|
|
|
Post by aarcuda on Feb 20, 2008 12:32:00 GMT -6
so whats the deal with the pcm programming. Does it work? who has had it done? what are the results? What does it do? What parameters does it change and most of all, what does it cost?
Im looking to install my shelby engione and want to make the most out of it.
|
|