00 to 03 Aurora Tune.

I'm not too interested in reading a 101 page thread. So long story short, what exactly can you do for the '01-03 cars in mostly stock state?

I'd like to get rid of the top speed limitation & the torque management.

This is on a 99 program

Same 03 DHS

www.youtube.com/watch?v=9MxiWTukDfg



www.youtube.com/watch?v=atUD3yoW3b0

15.16

So that Cadillac is tuned by you?
I have a GTech Pro SS and noticed that unless you tune it to your car at the strip it can give inflated times to the good. This is what I ran with a '97 Aurora, 140,000 miles, different injectors, 5k on a new trans, spare tire removed only, and no catalytic converter.
Temp was about 65-70 degrees outside and car was at operating temp.
s96.photobucket.com/albums/l164/blowngpguy98/?action=view¤t=aurorabraindragstrip.flv
If you can seriously do anything to the Northstar PCM I will be throwing out my 3.8SC conversion idea.
the timeslip....

What the hell car was next to the DTS? It was doing 109mph at the 1/8th!


I am fairly sure that all the FWD '00+ N* cars use the same Siemens PCM. I'm sure the programs have differences, though.

Shelby Series 1 cars had the previous gen Aurora V8 though, not the redesigned '01+ motor.

I've see videos and pictures, but still not sure if I even got an answer so I will try one more time. I have a shebly going in a 95 can you do anything for it?

Thanks in advance.

Name ________________________________________________
Address City __________________________________________
State/Province Zip/Postal Code __________________________
Phone Fax ____________________________________________
Email ________________________________________________
-------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------
**All Spaces Must be Completed or the Order Cannot Be Processed Vehicle Info
Year:___________________________________
Model: _________________________________
Engine: _________________________________
Vehicle ID#(VIN) __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __
Modifications Made **If Unmodified from stock—leave blank information**
Camshaft: Duration Int_____ Duration Exh_____ Lobe Sep Angle_____ Lift INT_____ EXH_____
Heads (ported, polished, larger valves?)_________________________________________
Compression ratio changed to to 1. ____________________________________________
Engine CID changed from to __________________________________________________
Boost Retard (BTM) __________________________________________________
Injector Size: (lbs/hr) __________________________________________________
Mass Air Flow Meter: __________________________________________________
Throttle Body Make Size MAF __________________________________________________
Turbo?___S-Charger?___ Make? ___________________Boost PSI? ___________ Intercooled? _______
NOxMake?________________ Dry?____ Wet?____ HP? _______ FMU__Yes__No
Exhaust Modifications Including Headers?_________________________________________
Transmission Shift Kit Yes? ____ No?____ Raise line pressure Yes? ____ No?____
TQ Stall Speed: _____________________________
WOT Shift RPM 1-2 __________ 2-3 __________ 3-4 ____________
Speed Limiter/Fuel cut-off set to MPH? _______________________
3D Mapping for fuel economy-Yes? _____ No? ______
Rear gear ratio? ___________ Changed to? ____________
Tire Height? ______________ Changed to For best accuracy, give tire O.D._______________
Octane Gas Used/Tuning level preference 87-89? ________ 89-91? _______ 91-93? _______
Vehicle Primarily Used For? ____________________________________________________________
Pinging Yes? _____ No? ____ At what rpm's Check engine light Yes?___ No? ___ TCode? ________
FORM IS SIGNED RELEASE FORM - NO CUSTOM WORK WILL BE COMPLETED UNLESS THIS RELEASE
By signing this release form I acknowledge that this product is not C.A.R.B. Certified and designed for Offroad use only.
I (print) ________________________________________ have personally completed the above worksheet, read the above release, and accept all the above terms and conditions.
Signed Date ___--___--______