|
|
Post by latenight72 on Mar 15, 2008 2:45:45 GMT -6
My injectors are getting quite noisy, and I fear some may be on their way out.  That said. Does anyone have any firsthand experience with "upgraded" injectors? IIRC, aurorabrain was running LS1 injectors on his for a while, how did that turn out? I have a few sources were I can get them for <$6 ea, so I may end up experimenting..  |
|
|
|
Post by RapMastaC1 on Mar 15, 2008 3:41:38 GMT -6
How can you tell if your injectors are going bad? Where are they located in the bay? Somewhere around the coil pack I'm assuming...
|
|
|
|
Post by Marc on Mar 15, 2008 7:53:24 GMT -6
How can you tell if your injectors are going bad? Where are they located in the bay? Somewhere around the coil pack I'm assuming... Between the intake manifold & the coil packs on the 2001. Go along the fuel rails to find them. |
|
|
|
Post by aurorabrain on Mar 15, 2008 8:42:12 GMT -6
My injectors are getting quite noisy, and I fear some may be on their way out. That said. Does anyone have any firsthand experience with "upgraded" injectors? IIRC, aurorabrain was running LS1 injectors on his for a while, how did that turn out? I have a few sources were I can get them for <$6 ea, so I may end up experimenting.. Yeah, about that. I ran 2nd gen injectors in my Classic and ran a 15.15 in the quarter mile with them. I have to believe that they have a better spray pattern than the stock classic injectors. The gas mileage was reduced to about 22 mpg max and 15 avg with my driving. LS1 injectors were essentially too large and fuel trims were far from normal. I ran Ecotec injectors for a little while and they are a little large also. I've tried '06 northstar injectors also, but the gas mileage and performance is very similar to the 2nd gen injectors. I have yet to find the perfect injector upgrade, but for now if i was going to the drag strip i'd be running 2nd gen ones. If you have a classic, you need a spare injector harness with the correct plugs on it to do this. |
|
|
|
Post by KliffsAurora on Mar 15, 2008 10:24:07 GMT -6
Are there really any injector upgrades for the car?
|
|
|
|
Post by latenight72 on Mar 15, 2008 14:38:06 GMT -6
What is the lb.hr & PSI on the stock 2nd Gen system? I think I heard 24lbhr/45psi?
-Todd
|
|
|
|
Post by Aurora40 on Mar 16, 2008 17:48:12 GMT -6
|
|
