|
|
Post by RADEoN on Jul 4, 2004 23:47:00 GMT -6
in the car I'm getting, the passenger side windows can not be moved by the drivers side controls, i know this isnt an issue, but does anyone know what a new switchbox would cost? or do you think it may be a loose/disconnected wire? thx  |
|
|
|
Post by omegaic on Jul 5, 2004 9:57:56 GMT -6
There's an issue with the wires inside the conduit between door and frame losing some insulation. Maybe something to look into, that's a relatively easy fix.
|
|
|
|
Post by RADEoN on Jul 8, 2004 22:42:28 GMT -6
does it happen alot?
|
|
|
|
Post by omegaic on Jul 9, 2004 9:42:53 GMT -6
I've read it in several places, also on that Aurora tips board I think.
|
|
|
|
Post by Aurora40 on Jul 9, 2004 9:44:12 GMT -6
That seems to be one of the most common failures on the Aurora, up there with the FPR. Everybody opens the driver's side door, so there is always stress and flex on those wires. I guess they weren't really up to it.
|
|
|
|
Post by RADEoN on Jul 9, 2004 12:54:59 GMT -6
where would I see where it needs fixed?
Could i just solder and use heatshrink tape on the wires?
|
|
|
|
Post by omegaic on Jul 10, 2004 17:58:21 GMT -6
I don't see why not. The wires flex inside the rubber sheath in between the door and the body.
|
|
|
|
Post by JimW on Jul 11, 2004 0:50:22 GMT -6
Isnt that what the factory does?
|
|
|
|
Post by omegaic on Jul 11, 2004 15:50:21 GMT -6
Good question, I haven't had to open it up yet! |
|
