|
|
Post by jero1timeowner on Jan 22, 2010 17:58:18 GMT -6
Does anyone know the idle and throttle relearn procedure?
|
|
|
|
Post by jason on Jan 24, 2010 14:23:20 GMT -6
I have never done it but there have been threads on it. Have you ran a search?
|
|
|
|
Post by dens95olds on Jan 30, 2010 13:21:04 GMT -6
You do the TP learn procedure first:
1. Engine off, turn ignition to on
2. Turn ign to off
3. wait a min of 20 seconds
4. Turn ign to on
5. Turn ign. to off
6. Wait a minimum of 20 seconds
7. Turn ign to on
8 . Turn ign to off
9. Wait 20 seconds
Then do the idle learn procedure:
1. Start the engine and let it idle until the temp reaches 176 degrees, then idle it an additional 5 minutes.
2. With the gear in park, briefly accelerate the engine to over 1500 RPM
3. Return to idle
4. Apply the brakes, put it in drive, and idle it for two minutes or until the check engine light goes out.
|
|
|
|
Post by postalc38 on Jan 30, 2010 18:59:56 GMT -6
Gotta love search  |
|
yaygull
Aurora Watcher
1996 Aurora - Pearl White
|
Post by yaygull on Jul 18, 2012 21:32:45 GMT -6
Awesome. I keep wanting to start a thread to ask questions, but my searches keep bringing up sufficient answers from previous threads. You folks have made my life so much easier already, and I've only been a member a couple of days!
|
|
bobsblue95
Super Moderator 
Scars of pleasure, scars of pain. Atmospheric changes make you sensitive again.
Posts: 3,125
Staff Member
|
Post by bobsblue95 on Jul 18, 2012 22:40:40 GMT -6
If we don't have this procedure stickied, we should.
|
|
