|
Post by brody2be on Mar 20, 2011 20:55:11 GMT -6
i have a 97' aurora and my hood latch cable mechanism releases all the way but the latch its self i think needs adjusted, and im not sure if i need to move it up or down or where to begin, could someone help?
|
|
|
Post by nelson480 on Mar 20, 2011 21:08:35 GMT -6
is the hood not opening or something?
|
|
|
Post by kyngofpop on Mar 20, 2011 22:14:08 GMT -6
I kinda understand what he's sayin, it doesn't "pop" open like the traditional hood does. How are you hood struts brody?
|
|
|
Post by nelson480 on Mar 20, 2011 22:55:58 GMT -6
I have to pull mine up to unlock it, but thats about it
|
|
|
Post by brody2be on Mar 21, 2011 15:29:16 GMT -6
when you go to use the latch from inside the car you have to pull all the way up and most of the time you would here a pop, and not have to go and lift the hood up from the hood latch assembly, i just believe something is out of adjustment here.
|
|
|
Post by nelson480 on Mar 21, 2011 15:51:26 GMT -6
Thats what i do
|
|
|
Post by adfdsfdwefsfd on Mar 21, 2011 17:05:13 GMT -6
U mean the hood is supposed to rise by itself when u pull the latch under the cluster?
|
|
|
Post by kyngofpop on Mar 21, 2011 17:11:36 GMT -6
Slightly.
|
|
bobsblue95
Super Moderator
Scars of pleasure, scars of pain. Atmospheric changes make you sensitive again.
Posts: 3,125
Staff Member
|
Post by bobsblue95 on Mar 22, 2011 13:33:44 GMT -6
It should pop up about an inch or so, just enough to get your fingers in there. Mine did the same thing when I got it but with use it's gotten better. I may have pushed or pulled the latch slightly forward or back, but I didn't loosen or adjust anything.
|
|