|
Post by sall on Oct 16, 2012 14:58:45 GMT -6
This is the range of rim size, width and offset that is compatible with ALL model Auroras. Bolt Pattern: 5x115 Offset Range: 34 to 45 Wheel Size Range: 16x7.0 to 22x9 Some have had success using the 5x114.3 bolt pattern. Same specs would apply. Factory Specs for Classic:Bolt Pattern: 5x115mm Wheel Size: 16x7 Tire Size: 235/60-16 OEM Hub Bore Size: 70.3mm OEM Offset: 51mm Backspace: 153mm Factory Specs for 2G: Bolt Pattern: 5x115mm Wheel Size: 16x7" or 17x7.5" Tire Size: 235/60-16 or 235/55-17 OEM Hub Bore Size: 70.3mm OEM Offset: 51mm Backspace: 160mm Check fitment measurements for comparison to OEM here: www.rimsntires.com/specs.jsp
|
|
tigger
Administrator
Posts: 2,844
Staff Member
|
Post by tigger on Oct 16, 2012 22:19:11 GMT -6
Ah yes the 22x9, from ConestogaPartsDirect. ;D
|
|
|
Post by almostjaded on Dec 3, 2012 14:50:55 GMT -6
Hub bore diameter, anyone?
|
|
|
Post by robaurora01 on Dec 3, 2012 17:39:05 GMT -6
Thats your offset. Also factory size on 2nd gen 16 is 225/60r16 not 235/60r16 altho i know thats factory for 1st gens
|
|
|
Post by sall on Dec 4, 2012 8:38:54 GMT -6
What? The offset is not the hub bore. The hub bore is 70.3mm. I will add that to original post.
|
|
|
Post by robaurora01 on Dec 4, 2012 10:11:07 GMT -6
Yea thats my bad i so read that wrong for some reason
|
|
|
Post by genone on Dec 4, 2012 18:01:03 GMT -6
Definitively only 115s fit. Some people have had studs shear off when using 114.3s or 4.5s. If going with 114.3s, the one and only way I would ever even think about considering it is with a perfect hub centric bore or an adapter to make it perfect.
|
|
|
Post by sall on Dec 4, 2012 19:50:09 GMT -6
I would never run the 114.3 personally, but some do. Not recommending it but yes hub centric rings a must in that case.
|
|
|
Post by sall on Aug 9, 2013 12:14:11 GMT -6
Updated first post with more specs.
|
|