|
|
Post by unioncreek on Mar 5, 2015 20:42:09 GMT -6
I want to flush the power steering fluid on my 01with the 3.5. How much fluid is in the system and what the best way to do it. I've seen fluid flushed by removing the return line, if that's possible which one is the return.
Bob
|
|
tigger
Administrator 
Posts: 2,844 
Staff Member
|
Post by tigger on Mar 5, 2015 21:42:18 GMT -6
Pressure side goes behind the engine, return is in front. I'm replacing my pressure hose this weekend, if the mailman comes through tomorrow, lol!
Manual advises the same method that you mentioned - Route return to a bucket, plug return inlet on reservoir, pour in new fluid with engine running (and a helper at the key!) until discharge fluid looks new (up to 4 qts), button up, top off, bleed(?}, done.
I'll be using DEX VI ATF.
|
|
