dajoe
Aurora Newbie
Posts: 15
|
Post by dajoe on Oct 21, 2016 15:30:39 GMT -6
I know there a lot of post here about removing consoles, but I think they are a different year. How do you remove the console in an 02. I have the shift knob off, the front sides off, the storage compartment off. How do you get the cup holder out and the wood grain panel off?
|
|
Paulaurora
Super Moderator
Posts: 3,828
Staff Member
|
Post by Paulaurora on Oct 21, 2016 15:46:34 GMT -6
There is 2 screws for the cop holder cover once you remove that there 2 more scrrews on front that holding wood grain panel . once you remove the screws you use some force to pull the wood grain up since its all on clips. just careful since there plugs connected to heated seats if u have them and/or TC button.
|
|
dajoe
Aurora Newbie
Posts: 15
|
Post by dajoe on Oct 22, 2016 14:24:26 GMT -6
thanks for the tips, got it out without breaking anything. Hope I can remember how it goes back together. Carpet is saturated with water. Thought it was from the sun roof but now think it is form the floor in the front. Half way up in front sheet metal has gaps in it
|
|
|
Post by ejohnson03 on Oct 24, 2016 9:33:13 GMT -6
Had lots of wet carpet in front of my '02 also. When I replaced the Blower Motor, found lots of water inside the motor and pouring out from there onto floor.
|
|
dajoe
Aurora Newbie
Posts: 15
|
Post by dajoe on Oct 25, 2016 21:30:05 GMT -6
took 3 days for the rubber under the carpet to dry
|
|