|
|
Post by AuroraGirlFromMars on Oct 17, 2017 7:22:25 GMT -6
My ignition switch backlight burnt out and I want to replace it with an LED bulb. How do you replace it?
|
|
|
|
Post by AuroraGirlFromMars on Oct 17, 2017 8:36:15 GMT -6
And I realized i posted this in Mechanical. Can a mod move it to electrical?
|
|
tigger
Administrator 
Posts: 2,844 
Staff Member
|
Post by tigger on Oct 17, 2017 22:39:25 GMT -6
Disconnect your battery and pull the airbag fuse.
Remove the trim, radio, and HVAC unit from the center dash.
Insert key and turn to RUN.
Reach inside dash opening and locate locking tab on lock cylinder.
Depress locking tab with flat screwdriver while pulling outward on key.
You'll have access to bulb, socket, and wiring from there.
Reassemble EXACTLY as it came out!
|
|
|
|
Post by AuroraGirlFromMars on Oct 23, 2017 18:12:57 GMT -6
Oh haha thank you so much! The insert key part is where I got confused.
|
|
tigger
Administrator
Posts: 2,844
Staff Member
|
Post by tigger on Oct 23, 2017 22:12:25 GMT -6
Sorry, were you able to get the lock cylinder out?
I could post some pics from the service manual...
|
|
|
|
Post by AuroraGirlFromMars on Oct 24, 2017 6:22:16 GMT -6
I havn't fully tried it but the photos would be helpful
|
|
