|
Post by Dominic on Oct 25, 2017 17:46:59 GMT -6
Hi everyone, I hope someone can help me out with some info. I cannot get the rear vents off to remove the arm rest to repair it. I've looked at the schematic and removed the two screws from the bottom vent and can see two tabs on the inside that look like they need to be depressed and I've done that and it still wont budge. I really don't want to break it, and I can hear and feel it stressing. So if someone who has done it before or knows what I'm doing wrong please help. Thanks Dominic
|
|
|
Post by Dominic on Oct 27, 2017 1:48:03 GMT -6
I got it, You need a good flathead and depress the tab then push toward the rear at the same time, It was difficult because you have to separate the vent tube from the back vents.
|
|
Paulaurora
Super Moderator
Posts: 3,823
Staff Member
|
Post by Paulaurora on Oct 27, 2017 5:46:20 GMT -6
nice!
|
|