|
Post by wfooshee on Jan 30, 2018 21:26:50 GMT -6
'98. Yesterday my turn signals started misbehaving. Either side, they light up but do not flash. All bulbs light up, and the front side marker turns off. (When the signals flash, the side markers flash opposite the front and rear signals, so the side turning off is expected.)
The hazard flashers work normally, all signals flashing (with the front side markers opposite,) so I'm sure it's not a bulb or circuit issue.
Suggestions?
|
|
tigger
Administrator
Posts: 2,844
Staff Member
|
Post by tigger on Jan 30, 2018 22:57:06 GMT -6
Bad flasher. There's one for turn signals, separate one for hazards.
|
|
|
Post by wfooshee on Jan 31, 2018 18:02:02 GMT -6
Thanks, didn't realize there were separate flashers!
|
|
RCA1186
Administrator
Rob
Go Pack Go!
Posts: 4,837
Staff Member
|
Post by RCA1186 on Feb 1, 2018 7:19:02 GMT -6
Yup, that's what I would suggest as well. I THINK the connector for the turn signal flasher is red (the hazard black)
|
|
tigger
Administrator
Posts: 2,844
Staff Member
|
Post by tigger on Feb 1, 2018 23:50:01 GMT -6
Haha, I actually prefer this 2 flasher set-up to the combo "module" of the 2G. They are usually identical flashers, so when the turn signals go out, you can do a quick swap-a-roo and replace the bad one at your leisure. I mean, how often do you need the hazards, lol!
|
|