|
DIC
Aug 29, 2018 18:03:01 GMT -6
Post by erowel on Aug 29, 2018 18:03:01 GMT -6
I just purchased my 5th Aurora, a 2001 4.0. I can't get the DIC to accept any new settings, it just keeps reverting back to the previous ones. Any ideas?
Thanks, Ed
|
|
Paulaurora
Super Moderator
Posts: 3,825
Staff Member
|
DIC
Aug 30, 2018 6:02:47 GMT -6
Post by Paulaurora on Aug 30, 2018 6:02:47 GMT -6
Do you have memory package? Do you open with same key fob? What type of settings you referring to?
|
|
|
DIC
Aug 30, 2018 9:21:00 GMT -6
Post by AuroraGirlFromMars on Aug 30, 2018 9:21:00 GMT -6
That is a good point. Find out which driver you are (unmodified car will say driver 1 or 2 when you start it.) Then set your settings as driver 1 or 2. And remember, each key fob corresponds to a driver. So keyfob A used and it says driver 1, that is driver 1 fob.
|
|
|
DIC
Aug 30, 2018 15:32:41 GMT -6
Post by erowel on Aug 30, 2018 15:32:41 GMT -6
Thanks for your reply. It does start with Driver 1, but no matter how many times I try, it won't accept any new settings.
|
|
|
DIC
Aug 31, 2018 0:44:41 GMT -6
Post by AuroraGirlFromMars on Aug 31, 2018 0:44:41 GMT -6
I was looking at my owners manual earlier today and noticed that in a fuse box (I forget which one) there is a fuse for memory. since memory seats and DIC are all connected, you might check that fuse. It might be what you need.
|
|
Paulaurora
Super Moderator
Posts: 3,825
Staff Member
|
DIC
Aug 31, 2018 6:44:17 GMT -6
Post by Paulaurora on Aug 31, 2018 6:44:17 GMT -6
What type of options you trying to save?
|
|
|
DIC
Jun 1, 2020 9:11:02 GMT -6
via mobile
Post by Rammjett52 on Jun 1, 2020 9:11:02 GMT -6
Dic doesn't work at all any ideas 2001 Aurora 6 cycler 3.5
|
|
Paulaurora
Super Moderator
Posts: 3,825
Staff Member
|
DIC
Jun 1, 2020 10:46:52 GMT -6
Post by Paulaurora on Jun 1, 2020 10:46:52 GMT -6
Does the DIC lights up with head lights on? does ON/OFF button works? check the fuse? 80% removing DIC and putting back in works.
|
|