|
|
Post by AuroraGirlFromMars on Aug 31, 2018 0:47:16 GMT -6
There is one that is by the passenger-facing vent in the center of the car(so by the DIC) and I need to replace it. Has anyone done the job? And if so, which one is it? Online there are 3 options, 1 left, 1 right, and one air inlet. Intution would tell me its the "right one" but I just want to be verifying. My scan tool says air mixture door #2 needs to be replaced if that helps.
|
|
tigger
Administrator 
Posts: 2,844 
Staff Member
|
Post by tigger on Aug 31, 2018 2:11:20 GMT -6
35 is left 13 is right 3 is air inlet You sure it's not just the actuator? you're gonna have to take the whole dash apart to get to that door...  |
|
|
|
Post by AuroraGirlFromMars on Aug 31, 2018 6:11:22 GMT -6
Ill post the code when I go pull it again, the noise comes right from the top of the dash and according to the scan tool and the erratic noises its the mixture door 2
|
|
RCA1186
Administrator
Rob
Go Pack Go!
Posts: 4,837
Staff Member
|
Post by RCA1186 on Aug 31, 2018 6:16:53 GMT -6
It probably would be the actuator that manipulates the door rather than the door itself
|
|
|
|
Post by AuroraGirlFromMars on Aug 31, 2018 7:27:01 GMT -6
Yes that is what I mean, as in the module that controls the door. sorry if i was unclear haha.
|
|
|
|
Post by AuroraGirlFromMars on Aug 31, 2018 9:41:40 GMT -6
I scanned the code again. B0282. Air mix door 2 inoperative. Would that be the right blend door actuator?
|
|
tigger
Administrator
Posts: 2,844
Staff Member
|
Post by tigger on Aug 31, 2018 15:29:11 GMT -6
Yes, I would think so.
It's #12 in the diagram, you want the part #?
|
|
|
|
Post by AuroraGirlFromMars on Aug 31, 2018 15:33:32 GMT -6
Rock auto lists the parts as left or right for ACDELCO. So I’ll get the right one and do the work. Anyone know how hard it is to swap that...? I’d hope I’d just have to remove the dash cover which is already missing half its bolts.
|
|
tigger
Administrator
Posts: 2,844
Staff Member
|
Post by tigger on Aug 31, 2018 16:13:26 GMT -6
It's pretty easy, I only pulled the glovebox and knee bolster. Not sure if that's the "right way", but it works, haha!
|
|
