Post by chokung on Oct 11, 2018 9:06:11 GMT -6
Hi,
I may haven't introduced myself properly but I have been a big fan on aurora's board for 3 years. My Susie-the Aurora is running nicely for the past 3 years; Initially, the plan was to use this 95'Aurora as a backup car and run around town; turn out that Aurora has been more of a daily driver and take my family to visit NYC, CapeMay, DC for the past years instead of my Audi 3.0.
Last night, though, it is the first time that after the hot start, (drove for an hour before, park on the hill), the car start then shuddering and die out? then I restart the car, hesitate a bit and drove to park. I left my scanner at home so I just got a chance to scan this morning, showing ONE stored code as title: P0103.
The car has new PCM (~2 years old), all new ignition coils (~ 1 years old), new alternator (~2 months old), unknown age of plugs and wires though (I trace the wires and they look good).
Idling this morning during the scan is normal. I plan to drive her out this evening and see what is going on there.
What would be the culprit of the shuddering and cut off last night?
I clear that P0103 code for now.
I just noticed something funny when plugged in the scanner; the Display showed all kind of weird info, i.e. change oil now, change transmission fluid now, ... all back to normal percentage when removed the scanner during engine running.
I may haven't introduced myself properly but I have been a big fan on aurora's board for 3 years. My Susie-the Aurora is running nicely for the past 3 years; Initially, the plan was to use this 95'Aurora as a backup car and run around town; turn out that Aurora has been more of a daily driver and take my family to visit NYC, CapeMay, DC for the past years instead of my Audi 3.0.
Last night, though, it is the first time that after the hot start, (drove for an hour before, park on the hill), the car start then shuddering and die out? then I restart the car, hesitate a bit and drove to park. I left my scanner at home so I just got a chance to scan this morning, showing ONE stored code as title: P0103.
The car has new PCM (~2 years old), all new ignition coils (~ 1 years old), new alternator (~2 months old), unknown age of plugs and wires though (I trace the wires and they look good).
Idling this morning during the scan is normal. I plan to drive her out this evening and see what is going on there.
What would be the culprit of the shuddering and cut off last night?
I clear that P0103 code for now.
I just noticed something funny when plugged in the scanner; the Display showed all kind of weird info, i.e. change oil now, change transmission fluid now, ... all back to normal percentage when removed the scanner during engine running.