zman
Aurora Newbie
Posts: 2
|
Post by zman on May 28, 2020 13:38:51 GMT -6
Good day and thanks in advance for any help. I picked up a 1999 with just under 39k miles. It starts, runs and drives down the road. The problem is when driving and coming to a stop it will stall, unless I easy into the stop. It seems it if I ease into the stop it stalls little to none of the time. It will also stop if in gear and hard turn steering wheel. The only code is IAC high but that is because I think the idle has been adjusted up from the previous owner told me to help with the stalling. After it stalls it starts up right away and idles beautiful when in park (I will adjust the idle down to normal and see if it still does). The following was replaced by the previous owner egr, maf,map,iac,pcv,plugs,wires, crank,cam,coils, module under the coils, air filter, been fuel pressure tested. I am going to do a good cleaning of the throttle body and do a good check for vacuum line cracking. I have a scan tool Matco Determinator Sys 5.0 but I am still new to using one if you have something specific to look for let me know.
|
|
tigger
Administrator
Posts: 2,844
Staff Member
|
Post by tigger on May 28, 2020 17:28:55 GMT -6
The only code is IAC high... I think you're on the right track... Check IACV connector and wiring as well.
|
|