|
Post by juggernaut on Jul 21, 2020 16:29:51 GMT -6
1997 ,Where does this go? I have led lights and turn signals, instead of installing a load resister on every light, I should be able to install this but I have no idea where it goes. Thanks for any help.
|
|
tigger
Administrator
Posts: 2,844
Staff Member
|
Post by tigger on Jul 22, 2020 7:43:08 GMT -6
|
|
RCA1186
Administrator
Rob
Go Pack Go!
Posts: 4,837
Staff Member
|
Post by RCA1186 on Jul 24, 2020 8:39:05 GMT -6
1997 ,Where does this go? I have led lights and turn signals, instead of installing a load resister on every light, I should be able to install this but I have no idea where it goes. Thanks for any help. You have to remove the black plastic kick panel under the steering wheel just above the pedals (where the light and OBD2 port mount, three screws) then look straight up under the dash. There are two flashers, I believe the one with the red connector is the hazards and the black connector is the regular signals. Give me a second and I can scrounge up a picture
|
|
RCA1186
Administrator
Rob
Go Pack Go!
Posts: 4,837
Staff Member
|
Post by RCA1186 on Jul 24, 2020 8:42:45 GMT -6
Dang, looks like the picture is no longer available (tiny pic no longer in service). If you look straight up under the dash with the kick panel removed you will see them. They are near the steering column.
|
|
|
Post by juggernaut on Aug 12, 2020 5:17:17 GMT -6
Thank you. I clicked on "view members recent post" several times and it never shows reply, never got an email notice either. Wasn't until I just clicked on "view thread" I saw this. Why even have "view post" if it doesn't show answers.
|
|