|
Post by AUROD X on May 9, 2021 20:47:41 GMT -6
|
|
|
Post by AUROD X on May 9, 2021 20:52:06 GMT -6
Only thing was to remove Dual Fans, got the Job Done in One(1) Hour.
|
|
RCA1186
Administrator
Rob
Go Pack Go!
Posts: 4,837
Staff Member
|
Post by RCA1186 on May 10, 2021 6:50:49 GMT -6
Yes something similar happened to me on my first Aurora, I punched it on a long straight away and lost all power immediately. Motor mounts were shot and it ripped a PCM ground when the motor shifted with the torque. Took them 3 days and $700 to find.
|
|
|
Post by AUROD X on May 10, 2021 11:13:57 GMT -6
Yeah I guess they overlooked the GROUND wire cause it looks intact on the Body side but on the other end (ALTERNATOR END) it ripped out the Terminal. I was lucky to observe the whole cable, good thing I had a flash light cause during the day it looks good but the ALTERNATOR end you can't see it with all that Gunk of oil blending in and it seems that it's intact.
|
|