scottydl
Super Moderator
There's nothin' like an American V-8...
Posts: 7,373
Staff Member
|
Post by scottydl on Sept 21, 2004 9:27:46 GMT -6
Whenever I use *my* key fob, all the seat/mirror/radio settings related to memory button #1 reset themselves. However, when my wife uses *her* remote, nothing happens. She can push the #2 button inside the car to get her settings back, but they won't go automatically with the remote. Anyone know why?
Her remote is a replacement by the way (that I programmed), not one of the factory fobs. Would that be the reason?
|
|
|
Post by omegaic on Sept 21, 2004 9:38:39 GMT -6
You have to associate the fob with memory 2.
|
|
scottydl
Super Moderator
There's nothin' like an American V-8...
Posts: 7,373
Staff Member
|
Post by scottydl on Sept 21, 2004 9:42:49 GMT -6
Sounds logical... and how do I accomplish that?
|
|
|
Post by omegaic on Sept 21, 2004 9:49:10 GMT -6
Memory Seat and Mirror Personalization Feature
The transmitters can also be programmed to move the driver’s seat and outside mirrors to a set memory position when the transmitter’s UNLOCK button is pressed.
To program the system: 1. Adjust the driver’s seat to a comfortable position. Adjust both outside mirrors to suit you. See “Mirrors” in the Index. 2. Press the SET button on the driver’s door panel. You will hear one beep. 3. Within five seconds, press one of the two memory buttons on the door panel. You will hear two beeps to confirm that the mirror and the seat cushion positions are entered into memory. 4. Press the UNLOCK button on the appropriate transmitter within five seconds. You will hear two beeps. The second transmitter can be programmed to record a different seat and mirror position by following the same steps.
If you prefer to program the transmitter to the exit seat position, which moves the seat completely down and back, follow these steps:
1. Press the SET button on the driver’s door panel. You will hear one beep. 2. Press one of the memory buttons on the driver’s door panel. You will hear one beep, but the seat will not move at this time. 3. Press the UNLOCK button on the appropriate transmitter within five seconds. You will hear two beeps.
This personalization feature will work only when the vehicle is in PARK (P). A beep will sound inside the vehicle when the UNLOCK button on the transmitter is pressed to move the seat and mirrors.
To turn this feature off, press SET and then UNLOCK within five seconds.
|
|
scottydl
Super Moderator
There's nothin' like an American V-8...
Posts: 7,373
Staff Member
|
Post by scottydl on Sept 21, 2004 10:10:56 GMT -6
Excellent......
|
|