|
|
Post by Gary on Mar 26, 2005 20:50:20 GMT -6
Hi I'm new but hope I'm doing this right!! Does any one know where the baulb for the Insterment Panel go??? Its skary driving at night in the dark. ha ha Its a 1995 and its big and dark inside. TNX Gary  |
|
scottydl
Super Moderator 
There's nothin' like an American V-8...
Posts: 7,373
Staff Member
|
Post by scottydl on Mar 28, 2005 15:03:32 GMT -6
Gary, I'm afraid our Auroras are a little more complicated that just replacing a bulb... from what I've read around here, our backlighting is provided by LEDs that are wired into the instrument panel. And unfortunately they can't be replaced without a LOT of work. Which lighting is out on your dash? I think JimW has looked into this, and might be able to provide more insight...
|
|
|
|
Post by Gary on Mar 29, 2005 9:28:23 GMT -6
::)Tnx for the reply I got it fixed. Another one of those clasic wireing problems and bad contacts on the connector. Tnx for the reply I did not know that we have LEDs.
Gary
|
|
scottydl
Super Moderator
There's nothin' like an American V-8...
Posts: 7,373
Staff Member
|
Post by scottydl on Mar 29, 2005 9:50:44 GMT -6
Many are LED's, and most of the switches have bulbs... but they too are wired into the device, requiring the whole thing to be replaced if the light goes out. What were the details on your repair? It helps to share with the board, so we can utilize what you learned on our future repairs!  |
|
|
|
Post by Gary on Mar 29, 2005 16:57:49 GMT -6
Hay guys it was my fault and the old vanity took over. Fact was the fuse looked to me withought my glasses but it was bad!!!
Atleast I'm honest. ha ha
Gary
|
|
