|
|
Post by SupaStealth on Jan 16, 2005 14:41:59 GMT -6
Hey, i was wonderin' if there was any way to pull codes by just turning the key or whatever.  |
|
|
|
Post by Marc on Jan 16, 2005 15:11:52 GMT -6
No.....so far as I know, you need a scan tool for that _________________ GM!!! BRING BACK OLDS!!!  |
|
dred98
Aurora Driver
Posts: 470 
|
Post by dred98 on Jan 16, 2005 16:00:32 GMT -6
The Northstar 4.6 on some Caddies can do that - they use the Climate Control centre.
They should have put it on the 4.0 's as well.
But that would cost the dealers money if they'd have done that!
|
|
scottydl
Super Moderator 
There's nothin' like an American V-8...
Posts: 7,373
Staff Member
|
Post by scottydl on Jan 17, 2005 16:35:09 GMT -6
I think the technique would be posted *somewhere* online if it were possible, and I've never been able to find it.  I know many late-model Chrysler vehicles will flash stored codes with the "check engine" light, after a certain ignition jey sequence is followed (I did it many times on my old '96 Avenger).... unfortunately that doesn't help us GM owners.  |
|
|
|
Post by SupaStealth on Jan 19, 2005 12:03:51 GMT -6
Yeah, i thought i could do that on my old chevy lumina i had too.
|
|
I know many late-model Chrysler vehicles will flash stored codes with the "check engine" light, after a certain ignition jey sequence is followed (I did it many times on my old '96 Avenger).... unfortunately that doesn't help us GM owners. 