|
Post by Marc on Feb 27, 2005 19:12:42 GMT -6
I have seen the question of programming the remote control for the 2001/02/03 appear on other boards. Here's how, according to the 2001 factory manual. It's easy if you have a scan tool. _______________ GM!!! BRING BACK OLDS!!!
|
|
scottydl
Super Moderator
There's nothin' like an American V-8...
Posts: 7,373
Staff Member
|
Post by scottydl on Feb 28, 2005 10:49:48 GMT -6
If you don't have a scan tool (who does?!), a jumper wire or bent paper clip will work. If it's the same as most other OBD-II equipped GM's, connect pinhole #4 and #8 to enter the remote programming mode. That's how us cheapies do it.
|
|