|
Post by anusemoon on Sept 11, 2004 15:27:42 GMT -6
Did you change your oil pan gasket yet? i need to replace mine badly,,,, i hope its not a crack in the engine....if you did was it hard
|
|
|
Post by R4D30N on Sept 11, 2004 21:05:28 GMT -6
personally, i didn't, but at my dads shop, there was a woman who wanted it done, so they did it. One man did it by himself in 8 hours. Keep in mine YOU WILL NEED A LIFT. While the car is on the ground, you unbolt alot of the bolts, then the final four are at the bottom. The car will be lifted, the final four removed, and the engine will fall out, unless you got something holding it up (which you will). After this, you scrape what's left of the old gasket off, place the new one, and do it again. it's alot easier said then done though. If things work out with me getting this Northstar 4.6, I'm going to replace it
|
|