|
|
Post by electrostatictommy on Mar 30, 2012 18:32:26 GMT -6
|
|
|
|
Post by nelson480 on Mar 30, 2012 19:43:29 GMT -6
Why what happened?
|
|
|
|
Post by electrostatictommy on Mar 31, 2012 17:19:40 GMT -6
The original rebuild was the bottom end. I started to get lifter noise and the Speed Turbine Sensor fault from the tranny. The mechanic did the work under warranty. I did however pay for a tranny rebuild and rebuilt lifters.
|
|
RCA1186
Administrator 
Rob
Go Pack Go!
Posts: 4,838 
Staff Member
|
Post by RCA1186 on Mar 31, 2012 17:23:46 GMT -6
Dang she's gonna be like a new car!
|
|
|
|
Post by dynamic1964 on Mar 31, 2012 18:20:51 GMT -6
Glad to see your pictures. Clean and nice. Good job!
|
|
|
|
Post by auroranut75 on Apr 3, 2012 17:31:41 GMT -6
Hey I really like what you are doing!!!!If I say IF I were a bit younger that is something that I would try.So I am doing a 62 Chevy PU Half ton step side.
|
|
|
|
Post by auroranut75 on Apr 3, 2012 17:44:36 GMT -6
Hey I really like what you are doing!!!!If I say IF I were a bit younger that is something that I would try.So I am doing a 62 Chevy PU Half ton step side. Attachments:
|
|
|
|
Post by electrostatictommy on Apr 19, 2012 9:36:28 GMT -6
|
|
|
|
Post by austinhealey on Apr 19, 2012 20:20:06 GMT -6
Nice work! If you haven't already, suggest installing a new coolant temp sensor while the engine is out -- it'll never be easier.
|
|
|
|
Post by nelson480 on Apr 19, 2012 21:46:52 GMT -6
Was RTV used on the lower case for the reseal?
|
|
