|
Post by irlfan82 on Oct 18, 2015 16:50:46 GMT -6
So the hose coming off my power steering pump is leaking, has anyone had to replace theirs and how difficult is it ?
|
|
tigger
Administrator
Posts: 2,844
Staff Member
|
Post by tigger on Oct 18, 2015 21:00:04 GMT -6
|
|
|
Post by 2002aurora35 on Oct 19, 2015 11:48:22 GMT -6
Can I use this write up for the 3.5 model? I am having the same problem with my 3.5. Also, do you know if there is anyone who provides literature on this Aurora? 2002 3.5L??
|
|
RCA1186
Administrator
Rob
Go Pack Go!
Posts: 4,838
Staff Member
|
Post by RCA1186 on Oct 19, 2015 11:53:30 GMT -6
The factory. Search factory service manual and your make and model year. There are usually plenty on eBay. I don't believe Chilton, Haynes..etc make anything on the Aurora
|
|
tigger
Administrator
Posts: 2,844
Staff Member
|
Post by tigger on Oct 19, 2015 12:38:15 GMT -6
|
|
|
Post by irlfan82 on Nov 1, 2015 10:58:19 GMT -6
wheres a good place to get the hose with paying an arm and a leg, but dont want to change it again in a year ?
|
|
tigger
Administrator
Posts: 2,844
Staff Member
|
Post by tigger on Nov 1, 2015 17:31:07 GMT -6
Got mine on Amazon (my wife has Prime - free 2 day shipping!). As I recall, ~$60 for ACDelco.
RockAuto has good prices, but I didn't want to pay the shipping, lol!
|
|
|
Post by irlfan82 on Nov 7, 2015 16:04:32 GMT -6
so i kinda of got the new hose but after looking over everything i noticed that one of the clamp fittings hits a bolt under the car and i can see it being a problam in the future. Any ideas how to go about it ?
|
|
|
Post by irlfan82 on Nov 8, 2015 10:59:35 GMT -6
any help would be great need to get it back together today...
|
|
tigger
Administrator
Posts: 2,844
Staff Member
|
Post by tigger on Nov 9, 2015 19:04:26 GMT -6
Are you having trouble getting the old one out or the new one in?
|
|
|
Post by irlfan82 on Nov 9, 2015 19:17:21 GMT -6
the old is out and the new one is in but i dont like the way the new hose runs. I tried 3-4 different ways and the one that worked best im still not happy with. My post with the pic shows how the new one sits.
|
|
tigger
Administrator
Posts: 2,844
Staff Member
|
Post by tigger on Nov 10, 2015 0:33:01 GMT -6
If you're worried about it rubbing, you can get ABS caps for bolt heads.
|
|
|
Post by irlfan82 on Nov 10, 2015 16:52:01 GMT -6
Has any one else had/ have this issue ?
|
|