|
Post by kbpickle on Mar 14, 2019 18:27:59 GMT -6
Hi all,
Looking for the curved black plastic piece in front of the right front wheel and behind the right front fog lamp. Mine's ripped, and I'd like to replace it. Please PM me here if you are interested in selling.
Thanks, Ken
Oops - - 2001, 2002, or 2003 vehicles would have this part. Both 3.5L and 4.0L thanks
|
|
Paulaurora
Super Moderator
Posts: 3,835
Staff Member
|
Post by Paulaurora on Mar 15, 2019 6:02:18 GMT -6
post a pic please
|
|
|
Post by AUROD X on Mar 17, 2019 11:14:19 GMT -6
I believe this passenger side in front of wheel.
|
|
|
Post by kbpickle on Mar 17, 2019 11:36:27 GMT -6
Yes, that's it. Thanks AUROD X. Sorry to be slow posting a picture. Thanks, again.
|
|
Paulaurora
Super Moderator
Posts: 3,835
Staff Member
|
Post by Paulaurora on Mar 17, 2019 17:40:49 GMT -6
got ya so you need driver side or pass?
|
|
|
Post by kbpickle on Mar 17, 2019 21:02:04 GMT -6
Thanks Paul,
I'm looking for the passenger side.
The whole liner assembly comes in two parts, but I only need the piece in front of the wheel. I don't need the other piece that is positioned above and behind the wheel.
Thanks, Ken
|
|
Paulaurora
Super Moderator
Posts: 3,835
Staff Member
|
Post by Paulaurora on Mar 18, 2019 12:16:29 GMT -6
got it i might have it.. will Let you know on weekends.
|
|
|
Post by kbpickle on Mar 18, 2019 21:54:51 GMT -6
Great. Thanks.
|
|
Paulaurora
Super Moderator
Posts: 3,835
Staff Member
|
Post by Paulaurora on Mar 21, 2019 18:51:23 GMT -6
Here what i have.
|
|
|
Post by AUROD X on Mar 21, 2019 20:23:32 GMT -6
Yup, that's it. Good old Taiwan replica goodies. 😁
|
|
|
Post by kbpickle on Mar 23, 2019 6:20:06 GMT -6
Terrific. Thanks Paul. PM sent. Ken
|
|
|
Post by kbpickle on Mar 26, 2020 7:00:19 GMT -6
One year later update - - I purchased Paul's replacement part and it's doing fine.
I finally concluded that the liner could be HDPE (still not certain), and so would not make a good solvent joint. Could be heat welded, but seemed easier just to replace the part.
Friends - sorry about this one inquiry turning into two threads. I guess I fell asleep at the wheel. Other thread also updated.
Ken
|
|