nolanman
Aurora Newbie
Apparently I like old FWD GM cars
|
Post by nolanman on Jan 12, 2024 17:08:29 GMT -6
Since I bought my aurora about three months ago, the turn signal felt like it blinked on and off really slow but I don’t think much of it and thought it might just be an aurora thing. About a week or two ago I noticed it seemed to start blinking even slower and eventually seem to get off sync with what the turn signal is supposed to be doing, it now blinks very practically with the time between the blinks being random and the time the lights on each blink being sometimes super long and sometimes very short. I read something about the turn signal relays going bad on these but any more insight would be helpful.
|
|
Paulaurora
Super Moderator
Posts: 3,829
Staff Member
|
Post by Paulaurora on Jan 12, 2024 20:21:43 GMT -6
|
|
|
Post by Greg K on Jan 12, 2024 20:23:39 GMT -6
First thing to check is lightbulbs front and back for any burnouts or corrosion. Ensure all sockets and bulbs are clean and functional. Another question: When you activate the four-way flashers, do they work properly?
|
|
nolanman
Aurora Newbie
Apparently I like old FWD GM cars
|
Post by nolanman on Jan 16, 2024 10:18:05 GMT -6
First thing to check is lightbulbs front and back for any burnouts or corrosion. Ensure all sockets and bulbs are clean and functional. Another question: When you activate the four-way flashers, do they work properly? the hazard light still work perfectly, and now the turn signals don’t work at all. Would a bad bulb still have the hazards work ok?
|
|
nolanman
Aurora Newbie
Apparently I like old FWD GM cars
|
Post by nolanman on Jan 16, 2024 16:41:05 GMT -6
First thing to check is lightbulbs front and back for any burnouts or corrosion. Ensure all sockets and bulbs are clean and functional. Another question: When you activate the four-way flashers, do they work properly? the hazard light still work perfectly, and now the turn signals don’t work at all. Would a bad bulb still have the hazards work ok? UPDATE: Just replaced the turn signal relay and now the turn signals work perfectly
|
|
|
Post by Greg K on Jan 17, 2024 2:28:49 GMT -6
Great news! Congratulations!
|
|