|
Post by jstdoit95 on Jun 25, 2004 13:34:10 GMT -6
As you may have seen I am in the process of rebuilding a 95 from two, I am going to have an abundance of spare parts. Im early in the project so its hard telling on some things if Im going to need them or not, but there are other parts that I know that I wont need, such as pretty much anything interior or body related, basically I will be using the under hood electrical, along with the master cylinder, wiper motor, coil packs, basically if you look at my post with the pics you should get a rough idea of what I will be replacing. The car that I am taking it out of has the beige interior and is gold or beige exterior. I have seen some posts mentioning radiators, mirrors, basically any misc part. Feel free to contact me, eventually I will be ebaying a lot of this stuff, but would rather not give ebay/paypal a lot of money in fees, I will guarantee that I will go lower then what you will find on carparts.com or places like that, im not looking to make a fortune, just to get rid of parts and help cover the expense of buying the two cars and getting the one running. Eventually the motor and tranny will be coming out and sold as well.
feel free to email with any questions
spencer@powersurge.net
regards
matt
|
|
|
Post by Amanda on Jun 25, 2004 14:05:26 GMT -6
Do you have an EGR valve kicking around? or any spare wheel speed sensors? I think those are my main items...
|
|
|
Post by JimW on Jun 25, 2004 17:05:30 GMT -6
Yea, I need some parts, the passenger side black panel between the front and rear door, mine is warped. If you have the embroided carpets, I would love to get those, and my rear vent on the centre console (that provides are to the back is cracked, I'd like that sliding vent assembly. I'll take a look at anything else
What condition are the tires in? I'm Looking for a good winter set.
Amanda you should pick up the rear trunk lid for you light experiment ;D
|
|
|
Post by erw38 on Jun 25, 2004 17:54:38 GMT -6
I might need a rim. Are the one's from a 95 the same one's that go on a 97?
|
|
|
Post by JimW on Jun 25, 2004 22:03:54 GMT -6
yep, they are all 16" rims, but you have the alloy time, not the chrome, make sure he has the alloy too
|
|
|
Post by erw38 on Jun 26, 2004 14:35:10 GMT -6
How much do you wan't for the rim (assuming its alloy). If the rims are chrome, how much do you want for all 4? Do you have pictures?
What's the difference btw aluminum and alloy? Is alloy just aluminum and a bunch of other metals mixed?
|
|
|
Post by JimW on Jun 26, 2004 22:48:03 GMT -6
I had the alumium, but our friend who has his car on display on the header of our boards has the stock chromed rims. Alloy is usually a composite of metals but in this case we are simply refering to a short form of aluminum.
|
|
scottydl
Super Moderator
There's nothin' like an American V-8...
Posts: 7,373
Staff Member
|
Post by scottydl on Jun 29, 2004 2:42:11 GMT -6
Newbie question here... what is the difference between 95-97 models and 98-99 models? I'm just now shopping for a used Aurora, so I'd be good info to have. Please PM me if this is too off-topic. Thanks!
|
|
|
Post by JimW on Jun 29, 2004 9:28:28 GMT -6
Scotty,
Start a new thread in General
|
|
|
Post by mrthomas73 on Nov 7, 2005 14:39:24 GMT -6
Im in need of a rack and pinion can u help me? if so my number is 973-725-136 also email me @ mrthomas73@nextel.blackberry.net
|
|
|
Post by SupaStealth on Nov 7, 2005 14:57:11 GMT -6
assuming that he started this thread over a year ago and with only 5 posts total, he probably doesn't check the boards here anymore
|
|
scottydl
Super Moderator
There's nothin' like an American V-8...
Posts: 7,373
Staff Member
|
Post by scottydl on Nov 7, 2005 18:47:38 GMT -6
assuming that he started this thread over a year ago and with only 5 posts total, he probably doesn't check the boards here anymore Ya think? Considering that when this post was written I was a newbie (see above) and I didn't even have my Aurora yet? And JimW was giving me posting advice? LOL! ;D I'm gonna move this to Marketplace just for giggles.
|
|
|
Post by oldsauroraman1 on Nov 7, 2005 22:04:32 GMT -6
Scotty:
Some, some of the parts are different. Such as window switches, seat belts etc.
|
|
|
Post by galen on Nov 13, 2005 8:31:15 GMT -6
I am i need of the pressure line for the power steering. how much do you want for the complete line if its avaliable?
|
|