|
|
Post by stevensolds on Jan 23, 2005 9:26:48 GMT -6
Where did this guy get these cool center caps at?? They look like different wheels, though thats not my point.  any idea? |
|
|
|
Post by auroralover on Jan 23, 2005 9:42:01 GMT -6
I have these on my 01
|
|
|
|
Post by stevensolds on Jan 23, 2005 9:44:10 GMT -6
this was on a 1998. does your 01 have the aurora emblem in the center cap?
|
|
|
|
Post by Aurora40 on Jan 23, 2005 12:55:15 GMT -6
That is a 2001-2002 16" wheel and center cap.
|
|
|
|
Post by Superdemon on Jan 23, 2005 16:37:18 GMT -6
Those are awesome. Would those work on my 97? I know one of my covers is starting to flake and I would like to replace them with those.
Mike
|
|
|
|
Post by JimW on Jan 23, 2005 17:09:04 GMT -6
Yes, as long as you stick with the 2nd gen Aurora 16's.
|
|
|
|
Post by OldsMike on Feb 5, 2005 7:20:14 GMT -6
Yes, as long as you stick with the 2nd gen Aurora 16's. I'm assuming that the 2nd gen center cap is either a little larger or a little smaller than the 1st gen cap (prolly larger?). If they use the same attachment scheme, would it be fair to say that the 2nd gen could be trimmed to fit the smaller wheel? That may be a daunting task for some but a walk in the park for your local body man. Wouldn't be cheap but I'm sure it would be a lot cheaper than buying new rims. I'm thinking to trim and paint about $40 per cap. I might try this just to see... |
|
