|
Post by RapMastaC1 on Oct 12, 2008 11:19:51 GMT -6
|
|
|
Post by alecbeaton on Oct 12, 2008 11:37:42 GMT -6
Althought I'm not sure how it could work, I don't really understand how watter wetter works either, and that's been proven to keep your coolant "colder", so I don't see why you couldn't make a heater hotter too.
|
|
|
Post by Superdemon on Oct 12, 2008 21:54:47 GMT -6
I won't buy anything from them just based on their annoying banner.
|
|
|
Post by aldrichd on Oct 12, 2008 22:02:33 GMT -6
Sounds like a waste of money to me.
|
|
|
Post by Speed Neon on Oct 14, 2008 14:05:21 GMT -6
Althought I'm not sure how it could work, I don't really understand how watter wetter works either, and that's been proven to keep your coolant "colder", so I don't see why you couldn't make a heater hotter too. water wetter breaks the surface tension that serve as a barrier to heat transfer, or so i am told. i can kinda go along with it. but at the same time no car i have used it in has shown a big drop in temp. but i have seen some drop...... almost like the control group sees results in a medical trial. taking sugar pills none the less.
|
|
|
Post by Aurora40 on Oct 15, 2008 8:10:19 GMT -6
water wetter breaks the surface tension that serve as a barrier to heat transfer, or so i am told. The main thing water-wetter does is allow you to run almost 100% water in your cooling system. Water transfers heat better than ethylene-glycol does, but if you ran straight water your car would probably boil over and your cooling system would corrode. Water wetter claims to raise boiling points and protect the system without needing to make up 50% of the volume of your cooling system. I think that is the sort of thing more appropriate for a track car than a street car, though.
|
|
|
Post by Marc on Oct 15, 2008 15:20:58 GMT -6
Bunk
|
|
|
Post by lanceslambos on Oct 19, 2008 9:13:20 GMT -6
so what happens if you use both at the same time? do they cancel each other out?
|
|
|
Post by killroypete on Oct 20, 2008 10:41:27 GMT -6
If it improves heat transfer from the engine to the water, then it does the same thing with the radiator. I can't see how this would relate to a warmer heater output. maybe for a few minutes, then the water temp. rise makes this irrelevant. (hard to explain... I'm just saying it's useless.)
|
|
|
Post by Aurora40 on Oct 20, 2008 13:49:56 GMT -6
so what happens if you use both at the same time? do they cancel each other out? Heheh, maybe! It might be like crossing the streams!
|
|
|
Post by killroypete on Oct 20, 2008 16:27:21 GMT -6
Oh no! It's the Mr. StayPuffed marshmallow man! ;D
|
|