|
|
Post by shelbyracing on Mar 17, 2012 7:37:12 GMT -6
How do you identify Shelby cams? I'm thinking of pulling the valve cover if the weather complies. Where would the numbers be? And what should they be?
|
|
|
|
Post by sall on Mar 17, 2012 13:37:15 GMT -6
|
|
|
|
Post by shelbyracing on Mar 17, 2012 14:44:54 GMT -6
It's vin 9 4.6 cams, but I don't know how to identify them.
|
|
|
|
Post by sall on Mar 17, 2012 16:43:52 GMT -6
lol I left that part out somehow.
|
|
RCA1186
Administrator 
Rob
Go Pack Go!
Posts: 4,853 
Staff Member
|
Post by RCA1186 on Mar 17, 2012 17:44:31 GMT -6
Measure the cam lobes And compare them to the 4.0 or 4.6 specs? I don't know haha, unless theres some kind of mark or stamp on them.
|
|
|
|
Post by shelbyracing on Mar 17, 2012 18:17:26 GMT -6
I thought they might have a part# stamped, I don't know either.
|
|
|
|
Post by dylanm on Mar 19, 2012 5:50:16 GMT -6
|
|
|
|
Post by shelbyracing on Mar 19, 2012 7:21:24 GMT -6
I emailed him and asked. I was told that the Shelby team installed the egr block off plates, but I'd like to be sure. Most were crate 4.0's.
|
|
|
|
Post by shelbyracing on Mar 19, 2012 7:33:09 GMT -6
That is some good info, nice find  So one should be able to see a 9% difference in lift between exhaust and intake. |
|
|
|
Post by sall on Mar 19, 2012 10:28:47 GMT -6
That is some good info, nice find So one should be able to see a 9% difference in lift between exhaust and intake. lol it's copied and pasted from the link I provided you from here. |
|
|
|
Post by shelbyracing on Mar 19, 2012 10:34:00 GMT -6
Lol, I didn't even see it.
|
|
RCA1186
Administrator
Rob
Go Pack Go!
Posts: 4,853
Staff Member
|
Post by RCA1186 on Mar 27, 2012 21:43:51 GMT -6
Well, this might actually help you haha, was browsing golden95's "got my 4.6" thread and found this pic  [/quote] every stamp you could need on the 4.6 cams if you can read em haha |
|
RCA1186
Administrator
Rob
Go Pack Go!
Posts: 4,853
Staff Member
|
Post by RCA1186 on Mar 27, 2012 21:47:36 GMT -6
another (borrowed from golden95)  [/quote] |
|
So one should be able to see a 9% difference in lift between exhaust and intake.