|
|
Post by scottyaurorav8 on May 22, 2012 9:20:11 GMT -6
I wanted to know from anyones experience if I can run a hi flo cat on my 01 aurora v8 without throwing a code. The reason I ask is b.c I wanna put on a corsa exhaust and putting on the hi flo makes it sound much better. I did the same setup on my 99' caddy seville sts without throwing a code, but not sure it be the same on this car, thanks.
|
|
|
|
Post by lanceslambos on May 22, 2012 9:41:47 GMT -6
yes nearly any and all performance cat systems will not throw a code, unless you go the cheap route like me and some others have...(a gutted cat) if it does, there's a connector you can use to set the 02 sensor farther back from the gas flow and will give u a clean reading.
|
|
|
|
Post by scottyaurorav8 on May 22, 2012 10:13:00 GMT -6
Ok, but would that mean id hafta relocate the o2 sensor bung from its factory location? Who sells this connector?
|
|
|
|
Post by shelbyracing on May 22, 2012 12:30:19 GMT -6
|
|
RCA1186
Administrator 
Rob
Go Pack Go!
Posts: 4,853 
Staff Member
|
Post by RCA1186 on May 22, 2012 12:59:20 GMT -6
I put a highflow on my '99 with no codes
|
|
|
|
Post by scottyaurorav8 on May 22, 2012 17:57:05 GMT -6
Ok cool guys thanks. Ill try it b4 buying the o2 simulator. Least ill know where to get one now  |
|
|
|
Post by genone on May 22, 2012 18:02:12 GMT -6
All you need is a mil eliminator and you won't throw a code even with no cat at all.
|
|
|
|
Post by adfdsfdwefsfd on Jul 1, 2014 17:19:26 GMT -6
Where can I find a mil eliminator for classic aurora?
|
|
|
|
Post by Kersh on Jul 2, 2014 5:58:14 GMT -6
My '01 threw an "inefficiency" code about once a week until the PCM was upgraded.
|
|
