|
|
Post by sall on Aug 27, 2012 12:20:24 GMT -6
Yeah probably should be in exterior but this is where everyone talks about tips. Found some exhaust tips that closely mimic the Corsa tips. Both of 'em about half the cost of one Corsa tip. They should fit perfectly when I do some exhaust work.  Welding is my new favorite hobby.  and what they look like on a Challenger...  Next month some time. |
|
|
|
Post by lkraft92 on Aug 27, 2012 12:50:47 GMT -6
those look good but i thought you were gonna go with some that have the offset like mine. it will look great either way. what r u gonna do for your exhaust setup?
|
|
|
|
Post by sall on Aug 27, 2012 14:15:25 GMT -6
Yeah I did not order them yet. I do like the slanted ones as well. Still debating. I have no idea what I am doing yet, but I am changing something up haha.
|
|
RCA1186
Administrator 
Rob
Go Pack Go!
Posts: 4,853 
Staff Member
|
Post by RCA1186 on Aug 27, 2012 17:12:56 GMT -6
Not bad, still throwing around the idea of tips, if I do that I'm getting straights again though haha
|
|
|
|
Post by scottyaurorav8 on Aug 28, 2012 2:30:16 GMT -6
I have the corsa tips from the corsa exhaust I put on my Aurora. Apparently they don't fit too well, so I went with different tips, however, I have seen Aurora's that have the corsa setup and they have the corsa tips that came with the setup and it looks fine. Another guy cut the corsa dual tips in haklf and used one tip on each side. Either weay, if your interested, I'd sell them to ya.
|
|
|
|
Post by sall on Aug 28, 2012 14:18:30 GMT -6
Sent ya a PM!
|
|
XJSman89
Administrator
Posts: 6,309
Staff Member
|
Post by XJSman89 on Aug 28, 2012 15:53:40 GMT -6
Do a cutout, rob! It's legal (or less illegal? Lol) and quiet when you want it!
|
|
|
|
Post by auroradude on Sept 25, 2012 23:22:44 GMT -6
Can you please put a link to where these are so I can buy them??
|
|
Welding is my new favorite hobby.
