|
|
Post by scottyaurorav8 on Jan 6, 2013 13:47:31 GMT -6
I had my girlfriend cellphone video my car launching from 60mph. Its a little dark but you can still make it out.
|
|
|
|
Post by 71corvette454 on Jan 6, 2013 14:20:38 GMT -6
Nice! Looks fast and sounds great ;D
|
|
|
|
Post by aba1987 on Jan 6, 2013 14:39:15 GMT -6
I love the sound!
|
|
|
|
Post by Marc on Jan 6, 2013 14:55:32 GMT -6
Terrific!!!!
|
|
|
|
Post by renaldo0613 on Jan 6, 2013 15:56:33 GMT -6
That thing sounds sweet!!
|
|
|
|
Post by renaldo0613 on Jan 6, 2013 15:57:15 GMT -6
What do u have going on there far as exhaust??
|
|
|
|
Post by dynamic1964 on Jan 6, 2013 17:05:29 GMT -6
Love the sound  |
|
|
|
Post by rorafan on Jan 6, 2013 17:10:06 GMT -6
Nice n' throaty sound. Thanks for sharing!
|
|
|
|
Post by scottyaurorav8 on Jan 6, 2013 21:36:23 GMT -6
Awesome, thanks for the positive feedback everyone. Im glad everyone likes it. Renaldo, I have corsa exhaust from a Seville STS modified to fit my Aurora. I purchased a OBDII magnaflow hi flow cat that is the same 2.5inch diameter as the exhaust. I actually had the wrong CAT shipped to me the first time and didnt realize until after it was installed. My car was much throatier with that cat, it was for OBD1 and didnt throw a code until after 4 months, otherwise I'd still have it on. I noticed a difference after I got the correct CAT installed. It was slightly lower toned...but oh well. I have some exhaust plans down the road I'm working on, but won't go into detail until after it's completed. It will def. make it more throatier and sure to add some horses. > |
|
|
|
Post by Marc on Jan 6, 2013 21:51:05 GMT -6
ScottyAuroraV8......What had to be done to the Seville STS exhaust
to get it to fit the Aurora?
|
|
|
|
Post by scottyaurorav8 on Jan 6, 2013 22:52:42 GMT -6
Not a lot. Basically just positioning the mufflers in the correct spot within the bumper and once positioned properly, they were installed. Then the Y pipe was connected with some cutting and the straight pipe with resonator was cut b.c it was a tad too long. The stock CAT came off and was replaced with my Hi-Flo....It took the shop about 2 hours. I actually have to go back b.c the left tip shifted to the right and isnt flush with the bumper slot for fitting the tips. It's a really clean setup, the mufflers and tips look great from the rear.
|
|
|
|
Post by renaldo0613 on Jan 7, 2013 4:00:41 GMT -6
ScottyAuroraV8......What had to be done to the Seville STS exhaust to get it to fit the Aurora? Took that question out of my mind lol. |
|
|
|
Post by Marc on Jan 7, 2013 12:25:47 GMT -6
ScottyAuroraV8......Thanks for the info. If I ever have to replace my 2001's exhaust, I'd go for the Corsa, now that I know how to make it fit.
|
|
|
|
Post by wireless on Jan 7, 2013 16:51:53 GMT -6
^ any exhaust shop would be able to do it with ease anyways lol |
|
|
|
Post by renaldo0613 on Jan 7, 2013 18:30:35 GMT -6
Not a lot. Basically just positioning the mufflers in the correct spot within the bumper and once positioned properly, they were installed. Then the Y pipe was connected with some cutting and the straight pipe with resonator was cut b.c it was a tad too long. The stock CAT came off and was replaced with my Hi-Flo....It took the shop about 2 hours. I actually have to go back b.c the left tip shifted to the right and isnt flush with the bumper slot for fitting the tips. It's a really clean setup, the mufflers and tips look great from the rear. Possible for us to get a pic of the set up? |
|
|
|
Post by Marc on Jan 7, 2013 19:36:31 GMT -6
^ any exhaust shop would be able to do it with ease anyways lol Some jobs I prefer to do myself.......this is one of them. |
|
|
|
Post by wireless on Jan 7, 2013 23:32:03 GMT -6
True... I guess it helps to know people that can weld, since I can't haha. get my stuff done for free, woo lol
|
|
|
|
Post by kyngofpop on Jan 8, 2013 0:53:14 GMT -6
Honestly it's kinda hard for me to make out anything in this vid. Sorta like Blair Witch Project with cars. Jus sayin...
|
|
