just got some 300m wheels

[jettbuell]

I got some chrome 17x7 Chrysler 300 rims, I am needing help trying to decide what size tires I should run, the car won't be lowered . Would like to keep about the same ride height, I have seen 225/55 and 235/55 or 235/65, anyone with some advice would be greatly appreciated.

[sall]

Those wheels have the wrong bolt pattern. Although others have ran 5x114.3mm on our 5x115mm, it is not worth the risk to me personally. You should get a set of hubcentric rings at mimimum.

235/55-17 tire size would be as close to stock. Can go wider though.

Use a calculator for comparison:

www.rimsntires.com/specs.jsp

[jettbuell]

Thanks for the reply, I am going to get some rings for them, I just thought that I have seen then on a couple other auroras and I got them for very cheap. if I have any problems or don't feel safe with them I will just keep the stock ones for now.

[auroraandy1]

so how is the lug pattern fit can you tell it's a bit too tight or loose fitting on the lugs?

[jettbuell]

Well I just put one on temporary, and it is maybe just a tad looser, and the hub difference is around 1.5 mm. The offset is different, they fit on back no problem but I half to put spacers on front, 1/4 inch spacers, of course I an putting them all the way around, so, just a little adjustment and they fit good I might change to longer studs just y to feel safer but can bolt up with out them.

[nelson480]

I have a set of these too. They fit on a 2006 impala just fine..

[sall]

Sure they fit, but not properly. Some run them, some don't. I for one don't risk it.

What is the offset on the 300M wheels and which ones did ya get? There are a couple styles.