|
Post by saurora on Aug 13, 2014 13:38:52 GMT -6
Okay guys I tried to conquer this one without being a bother to any of you. Came up short and I believe I could use some help.
My 01 olds aurora 3.5 auto 102k had a couple abs codes when I bought it, last weeks codes I pulled were C1232, came up twice C1225 C1221
I have switch out the from drivers hub assembly and still have codes c1232 Could this be a harness issue up the line from the hub? If so where and how do I inspect? Thank everyone in advance.
Wayne
|
|
Paulaurora
Super Moderator
Posts: 3,828
Staff Member
|
Post by Paulaurora on Aug 13, 2014 15:15:10 GMT -6
wire or lose connector issue.
|
|
|
Post by saurora on Aug 13, 2014 15:56:24 GMT -6
thank you, the code and abs light has disappeared.
|
|
|
Post by awehlage on Aug 13, 2014 16:20:18 GMT -6
What did you do?
|
|
|
Post by saurora on Aug 13, 2014 18:23:55 GMT -6
Changed out my driver side front hub, and the 2 of the codes went away but the C1232 code would not be reset but my innova 3100 scanner. I unplugged the abs plug/harness at the hub once again and reconnected, code disappeared.
|
|
|
Post by awehlage on Aug 13, 2014 19:24:33 GMT -6
Sometimes all it takes is to reseat the connection! Welcome to the mystery of the Aurora!
|
|
|
Post by saurora on Aug 13, 2014 20:23:36 GMT -6
Thank you for the welcome
|
|