tim1993
Aurora Driver
99 Oldsmobile Aurora 4.0L V8
|
Post by tim1993 on Dec 24, 2014 16:20:01 GMT -6
I replaced my old ignition switch with the one and now all of a sudden my windshield wipers, my radio, my windows and my information center is not working and also the anti lock abs light came on. Anybody got any suggestions? Need help asap if possible.
|
|
|
Post by sall on Dec 24, 2014 21:11:51 GMT -6
I replaced my old ignition switch with the one and now all of a sudden my windshield wipers, my radio, my windows and my information center is not working and also the anti lock abs light came on. Anybody got any suggestions? Need help asap if possible. Did you check the connectors that I mentioned/pictured and circled to you on Olds Club on facebook? The ones from the write-up? Fairly certain that will take care of some of the issues. Was the battery disconnected before ignition switched replaced? No? Check fuses.
|
|
tim1993
Aurora Driver
99 Oldsmobile Aurora 4.0L V8
|
Post by tim1993 on Dec 25, 2014 19:41:32 GMT -6
I replaced my old ignition switch with the one and now all of a sudden my windshield wipers, my radio, my windows and my information center is not working and also the anti lock abs light came on. Anybody got any suggestions? Need help asap if possible. Did you check the connectors that I mentioned/pictured and circled to you on Olds Club on facebook? The ones from the write-up? Fairly certain that will take care of some of the issues. Was the battery disconnected before ignition switched replaced? No? Check fuses. I didnt unhook the battery and I did check those parts that you recommended but there was no issue there I will be double checking the fuses tomorrow. Well actually I will be taking it to my mechanic tomorrow and I will get him to take a look.
|
|
|
Post by sall on Dec 26, 2014 22:08:12 GMT -6
You should always unhook the battery, it is good practice.
IP1 and 2 fuses under the rear seat also come to mind. It seems it is something under the dash though. Disconnect BCM and LCM? Just throwing something out there.
|
|
tim1993
Aurora Driver
99 Oldsmobile Aurora 4.0L V8
|
Post by tim1993 on Dec 28, 2014 10:26:22 GMT -6
BCM and LCM?
|
|
tim1993
Aurora Driver
99 Oldsmobile Aurora 4.0L V8
|
Post by tim1993 on Dec 28, 2014 12:51:06 GMT -6
The IP1 and IP2 fuses are not blown I just checked that.
|
|
|
Post by sall on Dec 28, 2014 14:01:56 GMT -6
Lighting control module and body control module. I'm not really sure what ya have going on here problem wise. I would remove that main connector ignition switch connector, multifunction switch connector and the wiper switch connector and re-seat them.
|
|
tim1993
Aurora Driver
99 Oldsmobile Aurora 4.0L V8
|
Post by tim1993 on Dec 28, 2014 16:41:05 GMT -6
Ok will try that but i contacted the place where I bought the part from and they have a replacement on the way should be here in 2-9 business days I'm hoping it wont be defective either.
|
|
|
Post by sall on Dec 28, 2014 18:58:42 GMT -6
how is it defective?
|
|
tim1993
Aurora Driver
99 Oldsmobile Aurora 4.0L V8
|
Post by tim1993 on Dec 30, 2014 19:10:27 GMT -6
Because all of my stuff was working before we put the new ignition switch in. But I just got the replacement ignition switch today wont be putting it in until Thursday. Gonna get my mechanic to do it this time.
|
|
gmac
Aurora Newbie
Posts: 1
|
Post by gmac on Oct 16, 2017 15:04:47 GMT -6
I have just experienced the same issue. Was it a defective switch or was there another issue. Bought a switch months ago finally got to changing it and now my dash, radio heater controls etc are not working. I/p fuses ok. half of the fuse panel on the drivers side dash is not getting power. help
|
|