|
|
Post by mybaby on Apr 20, 2016 18:03:42 GMT -6
After 15 years of faithful service, one of the 2 bulbs for the license plates gave up its fight. I thought it would be an easy fix but found that not to be the case. How do you get to the bulb? Does the inside cover of the trunk lid have to be removed? Anyone replaced their's? I have an '01 with the 4.0.
|
|
|
|
Post by Hurricane87 on Apr 20, 2016 19:26:05 GMT -6
There are two screws, surrounded by round black plastic things. Unscrew the screws, then pop out the plastic things with a common-blade screwdriver. Done. The only real challenge is doing it with the trunk lid open, as it likes to wobble.
|
|
tigger
Administrator 
Posts: 2,844 
Staff Member
|
Post by tigger on Apr 20, 2016 19:27:30 GMT -6
...Does the inside cover of the trunk lid have to be removed? Exactly, haha! After that, 1/4 turn out, replace bulb, 1/4 turn in. Do both, lol! |
|
|
|
Post by Hurricane87 on Apr 20, 2016 19:29:02 GMT -6
...Does the inside cover of the trunk lid have to be removed? Exactly, haha! After that, 1/4 turn out, replace bulb, 1/4 turn in. Do both, lol! Never tried that. Suspect my way is easier. |
|
tigger
Administrator
Posts: 2,844
Staff Member
|
Post by tigger on Apr 20, 2016 20:03:22 GMT -6
Exactly, haha! After that, 1/4 turn out, replace bulb, 1/4 turn in. Do both, lol! Never tried that. Suspect my way is easier. On a one piece lid, my way is the only way, haha! |
|
Paulaurora
Super Moderator 
Posts: 3,829
Staff Member
|
Post by Paulaurora on Apr 21, 2016 8:29:22 GMT -6
Remove the carpet cover and just stick ur hand where the bulbs are and you can twist it and remove the bulb.
|
|
