|
Post by derkach99 on Jul 9, 2017 23:57:02 GMT -6
I have read a few threads on here and on the web describing what to do to remove the steering wheel controls but I cannot pull or pry them off with out hurting my fingers. Can someone tell me how to remove them or direct me to a good write up of how to do so? I am trying to solder in new bulbs for most no longer work. Thank you in advance!
|
|
RCA1186
Administrator
Rob
Go Pack Go!
Posts: 4,838
Staff Member
|
Post by RCA1186 on Jul 10, 2017 6:00:53 GMT -6
What year? The '95-'99 are held on with screws if I remember right.
|
|
|
Post by derkach99 on Jul 11, 2017 0:43:18 GMT -6
My apologizes its a 2001.
|
|
RCA1186
Administrator
Rob
Go Pack Go!
Posts: 4,838
Staff Member
|
Post by RCA1186 on Jul 11, 2017 6:04:04 GMT -6
This is the best information I could find. There are a bunch of threads about replacing the bulbs but this was the first one I saw telling you how to remove the switches aurorah.proboards.com/thread/5801
|
|