|
|
Post by AmunRoo on Jan 20, 2018 17:54:35 GMT -6
Anyone know if we can run the Dodge challenger concave waffle style wheels on the 2nd Gen? I've seen claims of 5x115 with an offset of 5 - 27mm. I wouldn't mind running a set of them in black on my Dark Cherry 2G...
|
|
tigger
Administrator 
Posts: 2,844 
Staff Member
|
Post by tigger on Jan 21, 2018 1:06:58 GMT -6
HELLCAT wheels?!?! Haha, I like that!
Got these specs from wheel-size.com;
2015 Dodge Challenger HELLCAT
Rim..........9.5Jx20 ET18.5
Pattern.....5x115
Thread......M14 x 1.5
Bore.........71.5
2001 Oldsmobile Aurora 4.0
Rim..........7.5Jx17 ET51
Pattern.....5x115
Thread.....M12 x 1.5
Bore.......70.3
With the difference in offset, they'll mount only 7.1mm deeper. That shouldn't be a problem... But the almost 2 inches of tire and wheel sticking out of the wheel well most likely will.
|
|
|
|
Post by sall on Jan 21, 2018 12:33:01 GMT -6
Yeah I don't think those will work. Definitely be hitting the fenders/'qtr panels'. I wouldn't go with anything lower than 35mm offset.  Even with a 235/40-20 you are sticking out 1.2". I have managed a 32mm offset in the rear and 35 in the front with 9.5x20" w/ 255/35-20s. It's ~1.1" of poke from the factory all around. |
|
|
|
Post by AmunRoo on Jan 22, 2018 12:42:44 GMT -6
well, I'm currently running the Viscera VSC 770 Wheel..20X8.5 with a 35mm offset I think. I'm also running 265/40/20 Pirelli Pzero Nero tires with no issues.
|
|
