|
Post by AmunRoo on Feb 16, 2018 14:02:03 GMT -6
What personal touches or improvements have you done to your Roar-Uh to make it look better or make it your own?
To date, on my 2G Silver 3.5, I've added a 7 inch Kenwood Touchscreen, wood grain shift knob and aftermarket speakers. In my 2G Burgundy 4.0, I've added a wood grain shift knob, aluminum Pedal covers, contrasting color carpeting, installed 400 watt amp with speakers yet to come (need suggestions) and going to replace headliner fabric with leather or vinyl if the leather is too expensive. lol
only interior mods!
|
|
|
Post by Marc on Feb 16, 2018 14:49:31 GMT -6
A steering wheel cover from www.wheelskins.com and a wood grain shift knob..............................
|
|
|
Post by Marc on Feb 17, 2018 10:38:21 GMT -6
|
|
|
Post by AmunRoo on Feb 17, 2018 12:45:18 GMT -6
I have 3 sitting at home! lol I have 2 that are lighter than the stock wood grain, and one that is a very close match but has a blemish on the top of it. Just needs to be refinished. These are the interior shots of my 4.0 along with the shift knob that is pretty much a direct match...
|
|
|
Post by sall on Feb 17, 2018 13:48:15 GMT -6
Too many...
|
|
|
Post by AmunRoo on Feb 17, 2018 14:24:07 GMT -6
Too many... There can never be too many mods!!!!
|
|
|
Post by 01rubyrora on Feb 20, 2018 20:31:52 GMT -6
I would like to add a double-din head unit, but am having a really hard time deciding. Would also like to do a full Infinity sound system with components for the doors, 6x9 coax rears, 10"infinity sub, and a 4-channel and a mono amp. Are there any threads y'all recommend that already exist on these topics? I will keep browsing but there are so many contributions on our forum it can be hard to sift through!
|
|
Paulaurora
Super Moderator
Posts: 3,828
Staff Member
|
Post by Paulaurora on Feb 21, 2018 8:21:54 GMT -6
|
|
|
Post by guy48065 on Feb 21, 2018 11:24:11 GMT -6
The radio spot in the 2G Aurora is pretty shallow thanks to the bulkhead that holds that unique connector. Do most HU's + kit fit the available space or do you have to hack out the plastic bulkhead? The adapter connector shown in the 2nd link intrudes even farther into the radio area...
|
|
|
Post by AmunRoo on Feb 21, 2018 16:24:34 GMT -6
I'm running a Kenwood DNX 7140 without any issues... I only had to modify the bezel just a bit. and it's a 7" motorized touchscreen!
|
|
Paulaurora
Super Moderator
Posts: 3,828
Staff Member
|
Post by Paulaurora on Feb 23, 2018 7:21:01 GMT -6
The connector can be detached and be pushed inside so that plastic wall wont have an issue for you connection things to the head unit. I put 7 inch in to my aurora as well had to cut out the bezel to fit . I did install 6.2 inch radio for my moms aurora and it fit perfect with no mods need it.
|
|