|
|
Post by phewop118 on May 6, 2018 18:39:44 GMT -6
My 3.5 keeps blowing the interior lights Fuse. Usually I can get a week or two on a Fuse. I've pulled the visor connectors, as the visor mirrors are loose - I know these are an issue, but I didn't get much longer than normal before the Fuse blew.
Any other common areas I should be looking for a short circuit on the interior lights wiring?
|
|
Paulaurora
Super Moderator 
Posts: 3,829
Staff Member
|
Post by Paulaurora on May 7, 2018 6:29:35 GMT -6
the common issue is the visor connectors. The other one might be any short in door lights . Make sure as well that the connectors not broken for the visors and not touching metal.
|
|
|
|
Post by phewop118 on May 10, 2018 5:16:01 GMT -6
I guess the door lights will be the next thing I look at... The front passenger door is missing its vapor barrier, so I gotta get in there anyway to install a new one.
|
|
|
|
Post by phewop118 on May 20, 2018 21:57:55 GMT -6
I put a 5A fuse in and tried wiggling the wires in the doors. Tried banging on the headliner, and pretty much everything. Nothing would blow the fuse. Also noticed that the glove box light was staying on - put a small bumper on the inside of the glove box door with tape to make sure it shuts off when the glove box is closed. We'll see if it still blows the fuse...
|
|
