|
|
Post by aurora4l on Jan 5, 2019 17:01:01 GMT -6
Recently bought this car. Exterior door handle does not open the door. The interior handle works. I put a new exterior door handle on put it is still
not unlatching the door. I checked and the linkage is connected at both ends. Any help would be greatly appreciated. Thanks.
|
|
|
|
Post by 99oldsauroraman on May 20, 2019 22:02:27 GMT -6
Recently bought this car. Exterior door handle does not open the door. The interior handle works. I put a new exterior door handle on put it is still not unlatching the door. I checked and the linkage is connected at both ends. Any help would be greatly appreciated. Thanks. Is the linkage connected to the door handle? |
|
|
|
Post by jamezruiz on Jul 9, 2020 13:48:10 GMT -6
Recently bought this car. Exterior door handle does not open the door. The interior handle works. I put a new exterior door handle on put it is still not unlatching the door. I checked and the linkage is connected at both ends. Any help would be greatly appreciated. Thanks. I too have replaced front driver side door handle and it doesn't open for outside. Everything was attached as the original door handle. It looks like it doesn't push the mechanism all the way down as you mess with the door handle. Does the rod need to be bent or something? Dorman door handle replacement |
|
RCA1186
Administrator 
Rob
Go Pack Go!
Posts: 4,837 
Staff Member
|
Post by RCA1186 on Jul 10, 2020 6:42:25 GMT -6
Can you open the door with just the rod with the door handle removed? If so you might just need to straighten the rod out a little to give it some extra length.
|
|
