|
Post by scottyaurorav8 on Jun 1, 2019 12:14:05 GMT -6
I have a P0452 code (check engine light) coming up on my scanner. What are the steps to fixing the problem? Is it flat out the sensor? Does the gas tank have to be removed or lowered to change it or is there an easier method?
Any step by steps would be great because not sure of the specific locations of where the sensors are etc... Most shops want around $400 to fix so if I can fix this myself I'll be a very happy customer.
|
|
tigger
Administrator    
Posts: 2,844
Staff Member
|
Post by tigger on Jun 1, 2019 13:48:45 GMT -6
Could be the sensor, the connector, or the wiring...
IIRC, the sensor is on the fuel pump. Just pull the access panel in the trunk, you'll see the top of the pump. One connector is for the level sender, the other is for the pressure sensor.
GL
|
|
|
Post by scottyaurorav8 on Jun 1, 2019 13:56:39 GMT -6
Good old tigger! LoL Okay I'll check it out and report back Thanks bud!
|
|
|
Post by scottyaurorav8 on Jun 1, 2019 16:29:57 GMT -6
Ok next lol Picked up a duralast sensor from autozone. Swapped it out. Checked on my scanner and cleared the code. Restarted my car and check engine light popped up again. P0452
|
|