|
Post by AmunRoo on Jul 8, 2021 14:30:14 GMT -6
Okay, I have a misfire in cylinder 2. I have not thrown the p0302 code yet. My skin tool allows me to view misfires in real time.
The misfire is only occur at idle or when I'm stopped at a red light in the RPMs are low. If I had to describe it, it feels like a stumbling sensation. Once I get on the gas, everything runs smoothly. The sensation is far more pronounced whenever I run the AC. So I'm guessing it's worse under load.
I replaced the coil pack and spark plug. The issue went away but then it came back. And like I said, it's only happening on cylinder 2.
Anyone have any ideas or thoughts on what could be causing this misfire? I'm going to run an injector cleaner just in case it's an injector issue. Or maybe I'll just swap injectors around to see if the problem follows that specific injector.
Any and I'll help it's greatly appreciated!
|
|
|
Post by Marc on Jul 8, 2021 15:12:14 GMT -6
My guess: the injector.
|
|
|
Post by AmunRoo on Jul 8, 2021 15:44:02 GMT -6
I was thinking this too. I'm going to run the injector cleaner. But I also want to see if I get any other opinions.
|
|
|
Post by Marc on Jul 8, 2021 15:49:22 GMT -6
OK.
|
|