|
|
Post by jand2340 on Mar 23, 2006 17:49:02 GMT -6
Can anyone explain this code to me. Ive got a 2001 aurora 4.0 with 67k on it and its been a good car. the other day the MIL light came on and i hooked my scan tool and pulled code P0741 " torque converter clutch circuit preformance or stuck off" showed. the trans shifts fine, i dont feel any vibrations or hesitations?? what does this code mean and is there any signs that goes along with this code. thanks
|
|
|
|
Post by Marc on Mar 23, 2006 18:57:16 GMT -6
According to pg. 7-354 of the 2001 shop manual, DTC PO741 = too much slippage in the torque converter when the torque converter clutch is engaged.
|
|
|
|
Post by jand2340 on Mar 23, 2006 19:00:15 GMT -6
thanks for the info.. i did a bit of reading on google and diddnt find much, but i did read that it could be a bad harness or ground. Is this something i need to get checked out asap??
|
|
|
|
Post by Marc on Mar 23, 2006 19:12:04 GMT -6
Get it checked. Too much slippage in the torque converter will cause the transmission to run too hot. Also the extra engine RPMs will eat into gas mileage.
|
|
